LEVEL CONTROL AND ADJUSTMENT VIA SENSORS
FLOAT SWITCH 316 STAINLESS STEEL
Float switches for level adjustment, to ensure the automatic performance of process sequences (e.g., liquid dosed addition) and for level control, in order to avoid potential hazards (vacuum or dry operation) for appliances installed in the container (heating, pumps), or to prevent process liquid overflows from the receptacle.
The float switch is available with a 1.6 m long (PG) cable, a small LC (PP) or LC/L (PVDF) terminal casing and a large BC (PP) or BC/L (PVDF) terminal casing. The cable can be easily mounted on all box versions.
DATA SHEET TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED
POLYPROPYLENE AND POLYVINYL FLUORIDE FLOAT SWITCHES
Float switch for level adjustment, to ensure the automatic performance of process sequences (e.g., liquid dosed addition) and for level control, in order to avoid potential hazards (vacuum or dry operation) for appliances installed in the container (heating, pumps), or to prevent process liquid overflows from the receptacle.
To ensure an optimal chemical and thermal resistance, the float switch is made of polypropylene (PP) or polyvinyl fluoride (PVDF). The float switch is available with a 1.6 m long (PG) cable, a small LC (PP) or LC/L (PVDF) terminal casing and a large BC (PP) or BC/L (PVDF) terminal casing. The cable can be easily mounted on all box versions.
DATA SHEET TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED
CONDUCTIVE ROD SENSORS
Rod sensors provide high safety in the control and regulation of liquid levels in a vessel.
With non-conductive liquids or a limited conductor power that will not allow these sensors to be used, we recommend you to use our float switches. The level sensors is available in several builds:
- 2 to 5-rod probe for the detection of 1 to 4 levels
- with or without a built-in temperature sensor
The sensor can be supplied with the small LC (PP) or LC/L (PVDF) terminal casing and with the large BC (PP) or BC/L (PVDF) terminal casing.
To ensure an optimal chemical and thermal resistance, probe rods are made of different materials.
Contact points are determined by the different lengths of the rods and they can be changed later, by cutting to size; except for PTFE rods.
DATA SHEET TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED