CIRCULATION HEATERS
Circulation heaters are designed to preheat circulating fluids (liquids or gas).
They are available in the version suitable for applications in hazardous areas, according to ATEX/IECEX guidelines or in the version of safe areas.
DATA SHEET TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED
CIRCULATION HEATERS
RPM MODEL
Circulation heater in the RPM model allows to preheat circulating fluids (liquids or gas) up to 15 bar.
AVAILABLE IN ATEX/IECEX VERSION FOR APPLICATIONS IN HAZARDOUS AREAS.
CHARACTERISTICS:
- Painted steel body with supports
- Immersion heaters with brass screw cap and IP55 alluminium junction box
- Maximum incoming temperature 110°C (higher upon request)
- Adjustable thermostat 30°/90°C 3PH
- 3 threading sleeves gas of 1" or 1"1/2 depending on dimensions
CIRCULATION HEATERS
LH-AC/LH-CN/LH-II MODEL
Circulation heater in the LH model allows to preheat circulating fluids (liquids or gas) up to 6 bar and to the maximum operating temperature indicated for each model.
CHARACTERISTICS:
- Tubular stainless steel elements Aisi 316L or Aisi 321, nickel-copper depending on the model;
- Steel body with corrosion resistant coating;
- Threaded female connection gas 1"
- Immersion heaters with brass screw cap and IP66 aluminium junction box;
- All models include a little well of the same material of the heating element, bulb regulating thermostat with automatic reset and adjustable scales 0/90°C; 30/85°C or 36/125°C depending on the model;
CIRCULATION HEATERS
#CirculationHeaters #ATEXCirculationHeaters #ATEXHeaters #ATEXLorenzoni
LORENZONI ATEX CIRCULATION HEATERS