The STW II is a compact ON/OFF type capillary tube thermostat, housed in an Ex e certified polyester enclosure. Heaters, fans, motors and other equipment are energised and de-energised by means if this thermostat when specific temperature ranges are exceeded. This device can also be used to control the temperature in air or on different surfaces.
BSTW II - FAIL-SAFE SAFETY TEMPERATURE MONITOR
Falling calibration to maintain the temperature during the process. It turns on and off automatically every time that the temperature exceeds or drops below the setpoint value.
BTB II - TEMPERATURE LIMITER
Rising calibration to limit the temperature during the process. It switches off and stays off once the limit temperatures are reached.
BSTB II - SAFETY TEMPERATURE LIMITER
Same features as the BTB II limiter, but in this case the setting range is limited to 0°C to 130°C or 130°C to 190°C according to the temperature classes T3 and T4.
UNIT FOR TEMPERATURE CONTROL IN ELECTRIC HEAT TRACING SYSTEMS.
The TCU unit, due to its great sturdiness and reliability, is the best solution to command and control of the temperature of the electric tracing systems of pipes and vessels.
We provide different models of thermostat that regulate the heating cable temperature, also equipped with probe:
Thermostats for temperature control realized for applications with heating cables in ATEX and NON ATEX areas.
CATALOGUE TO DOWNLOAD ABOUT HEATING CABLES FOR INDUSTRIAL USE WITH ALL THE INFORMATION YOU NEED