heating cables for pipes
NO FROST PIPE SYSTEM WITH THERMOSTAT AND PLUG
HEATING CABLES TO AVOID FROST ON PIPES
The NO FROST PIPE SYSTEM is the perfect solution to solve the problem of pipe frosting. It is a heating cable at a costant power and ready to be used.
It is equipped with thermostat, calibrated for input at 5°C and output at 15°C; 2mt of cold cable and plug for connection.
DATA SHEET TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED
NO FROST PIPE SYSTEM SELF REGULATING CABLE TTM/MICRO
SELF REGULATING CABLE NO FROST PIPE
The NO FROST PIPE system is the perfect solution to the problem of water freezing inside pipes, in water solutions, in fuel oil and in any other kind of liquid.
It is a heating cable with semi-conductive matrix (made of polymer powder and graphite). The power produced decreases ad the temperature increases.
It can be cut to length, spliced and derived.
In case the cable overlaps, it does not produce dangerous overheating nor deterioration.
It is available equipped with all its accessories and control devices.
DATA SHEET TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED
NO FROST PIPE SYSTEM SELF REGULATING CABLE TTL
SELF REGULATING CABLE NO FROST PIPE
Heating cable that protects from ice and maintains pipes and tanks in temperature in industrial applications in safe areas or hazardous areas.
It is a heating cable with semi-conductive matrix (made of polymer powder and graphite).
The power produced decreases as the temperature increases.
It can be cut to length, spliced and derived.
In case the cabe overlaps, it does not produce dangerous overheating nor deterioration.
It is available equipped with all its accessories and control devices.
DATA SHEET TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED
TTM - TTL - MICRO THERMOSTATS FOR NO FROST PIPE SYSTEM
We provide different models of thermostats that regulate the cable's temperature, also equipped with probe:
- DBET5 - Industrial room thermostat with temperature capillary sensor +30°C -30°C, IP65 level of protection;
- DBET23 - Industrial room thermostat with temprature coiled sensor +30°C -30°C, IP65 level of protection;
Thermostat to control the temperature realized for applications with heating cables in safe zones or ATEX zones.
DATA SHEET TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED
ACCESSORIES
DATA SHEET TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED
CONNECTION/JUNCTION KIT FOR NO FROST PIPE SYSTEM TTM-TTL-MICRO:
ADDITIONAL ACCESSORIES:
DIRECT SUPPLY: kit for fast connection for direct connection between the power cord and the heating cable: waterlight execution IP66 and IP68;
THREE-WAY POWER SUPPLY: Kit T-connection to connect a power cable to two heating standard cables: waterlight execution IP65;
FOUR-WAY JUNCTION: Joint kit for four heating cables tyoe TTM-TTL-MICRO;
GASKET: Slotted gasket for heating cable, type TTM-TTL-MICRO;
TERMINAL: Sealing cap of shrinkable material for heating cables type TTM-TTL-MICRO: waterlight execution IP65;
PLATE: standard plate support for all kits. Dimensions: 125 x 25 x h 105mm, 2mm thick;
POLYESTER TAPE: Tape-reinforced polyester with glass threads: Dimensions: 19mm x 50m; resistant up to 130°C;
ALUMINIUM TAPE: Aluminium tape, dimensions 50mm x 50m, resistant up to 150°C. Only for plastic pipes;
WARNING LABEL: it indicates the presence of electric cable under the insulation. To install every 5m of pipe;
LORENZONI HEATING CABLES
CATALOGUES TO DOWNLOAD WITH ALL THE INFORMATION YOU NEED
